g.Recorder: Specs & Features

Comfortable amplifier configuration, data visualization, storage and review for g.USBamp, g.HIamp and g.MOBIlab+

g.Recorder - gtec's biosignal recording software

g.Recorder supports all g.tec biosignal-acquisition devices and provides comfortable configuration and setup of the system. Signals and parameters can be checked in the display mode, stored to disk, and later reviewed in the offline/replay mode.

With the extended version of g.Recorder also video data can be stored simultaneously with the biosignals, and the following parameters can be computed online:

  • CSA: Compressed Spectral Array (explorative analysis of signal properties and data quality for long-term recordings)
  • HR: Heart Rate (based on automatic R-peak detection from the ECG raw signal)
  • HRV: Heart Rate Variability (HR and HRV parameters reflect the state of the autonomous nervous system)
  • EP: Online EP calculation with statistical analysis

Further the extended version allows monitoring Cerebral Function/aEEG (amplitude integrated EEG) with automatic pattern classification. This is used to monitor the ongoing brain function of premature infants in the neonatal intensive care unit. This additional plug-in to g.Recorder is called g.FEATUREmonitor. In addition to the online classification, there is also an offline CFM-toolbox available, as a part of g.BSanalyze (g.tec's biosignal analysis software package).

The generated data format supports analysis with EMSE® and BESA® Software.

Product Highlights

  • Support for various g.tec biosignal amplifiers
  • Multimodal biosignal visualization and recording
  • Synchronized storage of biosignal data, triggers and video
  • Configuration and setup of hardware parameters
  • Storage of header information and subject/patient data
  • User/Admin mode for save operation
  • Intelligent file management and search functions
  • Stand-alone program
  • Data format supported by EMSE and BESA
  • Real-time EP calculation with statistical analysis
  • Online filters for visualization
  • Load topographic information for result presentation

More Product Details

BASIC version:

  • Password-protected administrator mode to change setup
  • Full access to hardware configuration and header information
  • Saves various configurations for different applications
  • Automatic file name management for safe and easy data storage
  • Store data in the open HDF5-format for scientific approaches
  • Store parameters only to save disk space for long-term recordings
  • Assign triggers, markers and marked epochs to the data
  • A perfect solution for research, teaching and clinical investigation
  • New: Data viewer was replaced by g.SCOPE
  • New: Scope can now draw beyond the channel borders
  • New: Several new kinds of autoscaling features
  • New: Impedance Measurement includes impedance values
  • New: Possibility to load montage files of the g.MONcreator
  • New: Possibility of applying visualization filters during the recording of raw data

Extended version:

  • aEEG (amplitude integrated EEG) / CFM (Cerebral Function Monitor)
  • Record high-quality video data synchronously with the signals
  • Full synchronization of signals, parameters and video in replay mode
  • New: Real-time calculation and analysis of evoked potentials
  • New: Possibility to print or make a screenshot of the EPs

The extended version of g.Recorder also allows monitoring Cerebral Function/aEEG (amplitude integrated EEG) with automatic pattern classification. This is used to monitor the ongoing brain function of premature infants in the neonatal intensive care unit. In addition to the online classification, there is also an offline CFM-toolbox available, as a part of g.BSanalyze (g.tec's biosignal analysis software package).


Evoked Potentials Viewer

The Evoked Potentials viewer provides a convenient way to display evoked potentials. The viewer displays averaged data frames for each acquired analog input channel. An evoked potentials plot is created for each acquired channel. The time frame represents a defined time period, consisting of a pre-trigger period, a post-trigger offset and a post trigger period. The viewer is able to display the trigger appearance and an averaged time frame for target and non-target evoked potentials. Significant differences between target and non-target evoked potentials can be calculated and highlighted.


Available configurations

Software

product no.: 0167 read more g.Recorder: Specs & Features — fully GUI-based (graphical user interface); comfortable biosignal visualization and storage; full control of the amplifier and header
product no.: 0167EXT read more g.Recorder Extension Pack — additional features for g.Recorder: real-time EP (evoked potential) visualization, video recording, data viewer mode, feature analysis: HR, HRV, CSA, CFM

See some related products

Hardware and Accessories

read more g.USBamp: Specs & Features — g.tec's high performance biosignal amplifier, acquisition and processing system
read more g.MOBIlab+: Specs & Features — mobile biosignal acquisition and processing with a PC or notebook
read more g.HIamp: Specs & Features — multi-channel biosignal amplifier

Complete Solutions

read more g.EEGsys: Specs & Features — complete EEG research systems, ready-to-go installation

Related Media and Documents

Product Manuals/Handbooks

g.Recorder

log in required
application/pdf
gRecorderQuickstart — 24/05/2017 — 1.14 MB
log in required
application/pdf
gRecorderUserManual — 24/05/2017 — 2.34 MB

Lectures

download
application/pdf
g.tec Lectures Introduction — 26/11/2015 — 142.03 kB
download
application/pdf
g.tec Material Use Agreement — 26/11/2015 — 88.98 kB
download
application/zip
Lecture 1: EEG — 26/11/2015 — 6.94 MB
download
application/zip
Lecture 2: BCI — 26/11/2015 — 4.23 MB
download
application/zip
Lecture 3: ECG — 26/11/2015 — 21.23 MB
download
application/zip
Lecture 4: EP — 23/09/2016 — 19.05 MB